Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDhanabalan, S-
dc.contributor.authorSivakumar, K-
dc.contributor.authorNarayanan, C Sathiya-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.description.abstractThe present work focuses on experimental quality analysis of electrical discharge machining (EDM) of two super alloys namely Inconel 718 and Inconel 625 with different diameter of hole of multiple holes copper electrodes. The diameter of hole of multiple holes in electrode, pulse current and (Ton) pulse on time have been chosen as process parameters to conduct the experiment trails. The MRR, EWR and form tolerance have been considered as output responses.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.26(3&4) [June & August 2019]en_US
dc.subjectElectrical dischargeen_US
dc.subjectMulti holeen_US
dc.subjectForm toleranceen_US
dc.subjectSuper alloysen_US
dc.titleForm tolerances investigation in EDM process for super alloys using multiple holes electrodesen_US
Appears in Collections:IJEMS Vol.26(3&4) [June & August 2019]

Files in This Item:
File Description SizeFormat 
IJEMS 26(3&4) 200-204.pdf225.35 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.