Please use this identifier to cite or link to this item: http://nopr.niscpr.res.in/handle/123456789/15142
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSuneetha, T B-
dc.contributor.authorRaghuram, P T-
dc.date.accessioned2012-11-27T11:33:17Z-
dc.date.available2012-11-27T11:33:17Z-
dc.date.issued2012-11-
dc.identifier.issn0975-0991 (Online); 0971-457X (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/15142-
dc.description442-446en_US
dc.description.abstractBubble size in a gas liquid ejector has been measured using the image technique and analysed for estimation of Sauter mean diameter. The individual bubble diameter is estimated by considering the two dimensional contour of the ellipse, for the actual three dimensional ellipsoid in the system by equating the volume of the ellipsoid to that of the sphere. It is observed that the bubbles are of oblate and prolate shaped ellipsoid in this air water system. The bubble diameter is calculated based on this concept and the Sauter mean diameter is estimated. The error between these considerations is reported. The bubble size at different locations from the nozzle of the ejector is presented along with their percentage error which is around 18%.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJCT Vol.19(6) [November 2012]en_US
dc.subjectBubble sizeen_US
dc.subjectError analysisen_US
dc.subjectGas liquid ejectoren_US
dc.subjectOblate ellipsoiden_US
dc.subjectProlate ellipsoiden_US
dc.subjectSauter mean diameteren_US
dc.titleBubble size measurement and error analysis in a gas liquid ejectoren_US
dc.typeArticleen_US
Appears in Collections:IJCT Vol.19(6) [November 2012]

Files in This Item:
File Description SizeFormat 
IJCT 19(6) 442-446.pdf87.42 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.