Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSingh, Dushyant-
dc.contributor.authorMondal, D P-
dc.contributor.authorModi, O P-
dc.contributor.authorSethi, V K-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.description.abstractThe wear behaviour of medium carbon boron steel with various heat-treatment cycles (annealing, intercritical annealing, and quenching and tempering) has been examined after and prior to shot peening. Shot peening intensity varies in the range 0.17 - 0.47 mm ALMEN ‘A’. The wear rate of intercritical annealed and quenched and tempered steels are considerably less than those of as-received and annealed steels, irrespective of the peening intensity. It is further noted that the wear rate reduced significantly irrespective of heat-treatment schedule at the critical peening intensity of 0.27 A, mm ALMENen_US
dc.sourceIJEMS Vol.17(3) [June 2010]en_US
dc.subject Heat treatment cycleen_US
dc.subjectShot peeningen_US
dc.subjectShot peening intensityen_US
dc.subjectAbrasive wearen_US
dc.subjectBoron steelen_US
dc.titleLow stress abrasive wear response of boron steel under three body abrasion: Effect of heat treatment and peening intensitiesen_US
Appears in Collections:IJEMS Vol.17(3) [June 2010]

Files in This Item:
File Description SizeFormat 
IJEMS 17(3) 208-218.pdf3.74 MBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.