Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/8424
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNarayanasamy, R-
dc.contributor.authorNarayanan, C Sathiya-
dc.date.accessioned2010-04-27T04:02:22Z-
dc.date.available2010-04-27T04:02:22Z-
dc.date.issued2005-04-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/8424-
dc.description141-150en_US
dc.description.abstractIn this work, the formability of HSLA (micro alloyed steel of 1.6 mm thickness) and EDDQ (1.2 mm thickness) steels have been studied and the suitability of HSLA and EDDQ steels for forming applications have been examined. The experimental work on microstructural aspects, tensile properties and formability parameters were carried out for both the steel sheet metals. The forming limit diagram for EDDQ and HSLA steels have been experimentally evaluated. A detailed analysis of the strain distribution profiles obtained from experiment has been attempted. The fracture surfaces of the formed samples have been observed using scanning electron microscopy with a view to obtain a correlation between fracture behaviour and formability of the sheet metals. The EDDQ steel has been found to possess good drawability and stretchability, whereas the HSLA steel has been found to possess limited drawability and stretchability.en_US
dc.language.isoen_USen_US
dc.publisherCSIRen_US
dc.relation.ispartofseriesC22C 38/00en_US
dc.sourceIJEMS Vol.12(2) [April 2005]en_US
dc.titleFormability of HSLA and EDDQ steels of tube products of Indiaen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.12(2) [April 2005]

Files in This Item:
File Description SizeFormat 
IJEMS 12(2) 141-150.pdf1.45 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.