Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/785
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLanjewar, R W-
dc.contributor.authorSaha, P-
dc.contributor.authorDatta, U-
dc.contributor.authorBanerjee, A J-
dc.contributor.authorJain, S-
dc.contributor.authorSen, S-
dc.date.accessioned2008-04-07T09:46:03Z-
dc.date.available2008-04-07T09:46:03Z-
dc.date.issued2008-04-
dc.identifier.issn0022-4456-
dc.identifier.urihttp://hdl.handle.net/123456789/785-
dc.description282-287en_US
dc.description.abstractThis study evaluates optimum machining parameters like tool geometry, tool materials, single or double tithed machining process, feed and cutting speed for minimum vibrations and cutting forces for turning AISI 304 austenitic stainless steel on autosharpening machine. Taguchi’s parameter optimization method is used to evaluate best possible combination for minimum cutting force and minimum vibrations during machining.en_US
dc.language.isoen_USen_US
dc.publisherCSIRen_US
dc.sourceJSIR Vol.67(4) [April 2008]en_US
dc.subjectCTC machineen_US
dc.subjectCTC rolleren_US
dc.subjectAutosharpeningen_US
dc.subjectChasingen_US
dc.subjectOptimisationen_US
dc.titleEvaluation of machining parameters for turning of AISI 304 austenitic stainless steel on auto sharpening machineen_US
dc.typeArticleen_US
Appears in Collections:JSIR Vol.67(04) [April 2008]

Files in This Item:
File Description SizeFormat 
JSIR 67(4) (2008) 282-287.pdf212.86 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.