NISCAIR Online Periodicals Repository

NISCAIR ONLINE PERIODICALS REPOSITORY (NOPR)  >
NISCAIR PUBLICATIONS >
Research Journals >
Indian Journal of Engineering and Materials Sciences (IJEMS) >
IJEMS Vol.13 [2006] >
IJEMS Vol.13(5) [October 2006] >


Title: A modified gun technique for melt quenching of reactive alloys
Authors: Rao, V Venkateswara
Issue Date: Oct-2006
Publisher: CSIR
IPC CodeC22C 9/05
Abstract: The conventional gun melt quenching technique was slightly modified to facilitate rapid solidification of highly reactive alloys like Cu-Mg. This involved the use of molten salt flux for melting and quenching the alloy. The cooling rate achieved was estimated to be in the range of 105-106 K/s. A Cu-28 at% Mg alloy was successfully melt-quenched by this method. The melt-quenched foils had a lustrous golden yellow colour. Formation of metastable tetragonal and amorphous phases was determined by XRD and TEM.
Page(s): 451-454
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Source:IJEMS Vol.13(5) [October 2006]

Files in This Item:

File Description SizeFormat
IJEMS 13(5) 451-454.pdf356.28 kBAdobe PDFView/Open
 Current Page Visits: 774 
Recommend this item

 

National Knowledge Resources Consortium |  NISCAIR Website |  Contact us |  Feedback

Disclaimer: NISCAIR assumes no responsibility for the statements and opinions advanced by contributors. The editorial staff in its work of examining papers received for publication is helped, in an honorary capacity, by many distinguished engineers and scientists.

CC License Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India

Copyright © 2012 The Council of Scientific and Industrial Research, New Delhi. All rights reserved.

Powered by DSpace Copyright © 2002-2007 MIT and Hewlett-Packard | Compliant to OAI-PMH V 2.0

Home Page Total Visits: 623203 since 06-Feb-2009  Last updated on 13-Nov-2014Webmaster: nopr@niscair.res.in