Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/58251
Title: Effects of iron powder on properties of geopolymers subjected to different curing regimes
Authors: Gulmez, Nihan
Kockal, Niyazi Ugur
Keywords: Geopolymer;Iron powder;Silica fume;Slag
Issue Date: Aug-2021
Publisher: NIScPR-CSIR, India
Abstract: Silica fume, slag and iron powder are by-products from various industries. In parallel with development of industrial technology, it is also known that these by-products which cause rapid pollution of the environment are also harmful to human health because they are easily respirable. For this reason, a series of experiments were carried out to determine physical and mechanical properties on samples prepared using different blend designs to examine the effect of factors such as curing conditions, binder type and waste iron powder content. Percentages of iron powder added to replace the aggregate are 10%, 20%, 30% and 40% by volume of slag aggregate. It was observed that the substitution of 30% by volume iron powder instead of slag in geopolymer mortars is the most effective in increasing splitting tensile strength. For 40% partial replacement of fine aggregates with iron powder, increases in compressive strength and flexural strength of slag-based mortars were 7.2% and 43.4%, respectively, compared to mortar without iron powder at 60°C curing conditions.
Page(s): 393-408
URI: http://nopr.niscair.res.in/handle/123456789/58251
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Appears in Collections:IJEMS Vol.28(4) [August 2021]

Files in This Item:
File Description SizeFormat 
IJEMS-393-408.pdf3.33 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.