Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/57657
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKoyyagura, Lakshmi Kala-
dc.contributor.authorKaranam, Prahlada Rao-
dc.date.accessioned2021-07-07T06:29:50Z-
dc.date.available2021-07-07T06:29:50Z-
dc.date.issued2021-04-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/57657-
dc.description152-164en_US
dc.description.abstractComposite laminates are gorgeous for several applications such as aerospace and aircraft structural components due to their excellent properties. Typically, mechanical drilling has been important machining operation for components made of composite laminates. Nevertheless, laminated composites are considered as hard-to-machine material which results in low drilling efficiency and drilling-induced delamination which is undesirable. This paper reviews the experiments during drilling of CFRP/Al stacked and sandwich composites. The machinability facets of these material stacks has been generally used in aerospace applications, it has been studied based on impact of drill material, drill geometries, and drilling process parameters such as speed and feed. Composite material requires high spindle speed and low feed rate, whereas drilling aluminum requires stability between speedsto feed rate. The review reports essential results and gap in the collected literature for CFRP/Al stacked and sandwich composites. A compromise between several parameters is required during drilling of multi-material stacks. The problems and solutions allied to drilling of multi-material stacks are deliberated and the directions in which the research on drilling of multi-materials may be carried out are suggested in this paper. It is intended to assist readers to acquire a thorough view on mechanical drilling of laminated composite.en_US
dc.language.isoenen_US
dc.publisherCSIR-NIScPR, Indiaen_US
dc.sourceIJEMS Vol.28(2) [April 2021]en_US
dc.subjectCFRP/Al stacken_US
dc.subjectDrillingen_US
dc.subjectDelaminationen_US
dc.subjectThrust forceen_US
dc.subjectDrill typeen_US
dc.subjectGeometryen_US
dc.titleInfluence of cutting conditions in drilling of CFRP/Al stacked compositesen_US
dc.typeArticleen_US
dcterms.publisherCSIR-NIScPR, India
Appears in Collections:IJEMS Vol.28(2) [April 2021]

Files in This Item:
File Description SizeFormat 
IJEMS-152-164.pdf797.17 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.