Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/56160
Title: Effect on wear property during LN2 sliding
Authors: Sharma, Anurag
Singh, Ramesh Chandra
Singari, Ranganath Muttanna
Keywords: Dry sliding;Cryogenic sliding;Temperature;Wear;Optimization;ANOVA
Issue Date: Oct-2020
Publisher: NISCAIR-CSIR, India
Abstract: In the presented research work the experiments have been performed by using design of experiments (DOE) L18 [OA] orthogonal array based on Taguchi S/N (signal-to-noise) ratio. The three control factors namely sliding speed, load and sliding distance varied to three levels (1, 2 and 3), respectively. One control factor has the sliding condition varied to two levels (l= Dry and 2= Cryogenic with LN2). The dry sliding condition has been made without any coolant. Cryogenic sliding condition has been made by using the direct supply of LN2 at the interface of pin and disc. Wear volume loss has found to be 45-55% lower during cryogenic cooling with LN2 as compared with dry sliding. (ANOVA) analysis of variance revealed that sliding condition is having the highest effect of contribution at 64.37%. Field emission scanning electron microscope (FSEM) images of the pins have shown (i) adhesion and edge fracture during dry sliding, (ii) clean and smooth surface found during cryogenic cooling. Field scanning electron microscope (FSEM) images of wear tracks showed (iii) delamination, cavities and plough during dry sliding and (iv) the surface generated during cryogenic sliding was clean with low debris.
Page(s): 1009-1017
URI: http://nopr.niscair.res.in/handle/123456789/56160
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Appears in Collections:IJEMS Vol.27(5) [October 2020]

Files in This Item:
File Description SizeFormat 
IJEMS 27(5) 1009-1017.pdf679.39 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.