Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/55280
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKarthik, A-
dc.contributor.authorSampath, P S-
dc.date.accessioned2020-09-24T07:17:17Z-
dc.date.available2020-09-24T07:17:17Z-
dc.date.issued2020-09-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/55280-
dc.description267-273en_US
dc.description.abstractIn this study, cotton/bamboo woven fabric reinforced composite has been subjected to drilling operation and thrust force is analysed for different combination of feed rate, cutting speed and drill geomentry. Box-Behnken experimental design is used to optimize the cutting parameters along with the input parameters, such as drill- bit geomentry, spindle speed and rate of feed. Further, a drill with standard twist is used for drilling operation. The results show that with the increase in thrust force, feed rate increases and cutting speed experiences decrease when drill diameter is increased. The SEM analysis is also done to reveal about various damages, like fibre pullout, peel off, uncut fibres and voids.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.45(3) [September 2020]en_US
dc.subjectBox-Behnkenen_US
dc.subjectCottonen_US
dc.subjectDrillingen_US
dc.subjectFibre reinforced compositeen_US
dc.subjectNatural fibreen_US
dc.subjectThrust forceen_US
dc.titleAnalysis of thrust force in drilling cotton with bamboo blended fibre-reinforced composites using Box-Behnken methodologyen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.45(3) [September 2020]

Files in This Item:
File Description SizeFormat 
IJFTR 45(3) 267-273.pdf945.17 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.