Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRahimi, Saeideh-
dc.contributor.authorAhmadi, M S-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.description.abstractIn this research, synthetic leather samples have been produced using polyvinyl chloride film and three types of reinforcing polyester fibre fabrics, namely woven, knitted, and nonwoven, with similar areal weights. The samples are then subjected to tensile, trapezoid tear and bursting tests. The effect of structural parameters of the reinforcing fabrics on the mentioned properties has been analyzed and discussed. Based on the results, woven fabric reinforced leathers show the highest tensile and bursting strength, followed by knitted and nonwoven fabrics reinforced ones respectively. The highest tear strength value is observed in the nonwoven reinforced samples.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.45(3) [September 2020]en_US
dc.subjectBacking fabricen_US
dc.subjectLaminated fabricen_US
dc.subjectMechanical propertiesen_US
dc.subjectSynthetic leatheren_US
dc.subjectPolyvinyl chloride filmen_US
dc.titleMechanical properties of synthetic leather reinforced with woven, knitted and nonwoven fabricsen_US
Appears in Collections:IJFTR Vol.45(3) [September 2020]

Files in This Item:
File Description SizeFormat 
IJFTR 45(3) 312-318.pdf854.14 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.