Please use this identifier to cite or link to this item:
|Title:||Experimental study on developed electrochemical micro machining of hybrid MMC|
|Authors:||Kalra, Charanjit Singh|
|Keywords:||Electrochemical micro machining;Hybrid MMC;Material removal rate;Electrode wear rate|
|Abstract:||An electrochemical micro machining (ECMM) set-up has been developed and utilized for experiments. The effects of ECMM parameters on material removal rate and electrode wear rate have been analyzed during micro drilling of hybrid Al/(Al2O3p+SiCp+Cp)-MMC with tungsten electrode of diameter 298 µm. The machined surface texture, and decomposition of metallic compounds deposited on the workpiece as well as on micro tool have been analysed through SEM, EDX and XRD images. It may occur due to the reaction of the anode with electrolyte (NaCl). The formation of a new compound sodalite has been identified. This is due to the reaction between sodium chloride and reinforced particles i.e. Al2O3, SiC, C elements presence in hybrid MMC. It has also been identified that the formation of ferropargasite chlorous compound might be due to a chemical dissolution of ferrous material and reaction with sodium chloride. Formation of voids, micro-cracks, craters, debris, pulled out materials and pockmarks have been analyzed during micro machining at high current and pulse-on time parametric setting. From EDX analysis, it has been noticed that the reinforced particles present in hybrid metal matrix composite have been deposited on a micro tool. This is due to the melting and re-solidification of hybrid Al/MMC during machining by micro sparking at high supply voltage and pulse on time.|
|ISSN:||0975-1017 (Online); 0971-4588 (Print)|
|Appears in Collections:||IJEMS Vol.27(3) [June 2020]|
Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.