Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/55251
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRajeswari, Sellamani-
dc.contributor.authorSivasakthivel, Perumal Subramaniyan-
dc.date.accessioned2020-09-23T09:33:58Z-
dc.date.available2020-09-23T09:33:58Z-
dc.date.issued2020-06-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/55251-
dc.description590-602en_US
dc.description.abstractMachining performances are strongly influenced by vibration which occurs due to the dynamic nature of machine tool structures. A self excited vibration commonly known as chatter is frequent debacle occurs during milling operations which cause worsening outcomes such as excessive tool wear, poor surface finish and reduced tool life. In this paper an effort has been tried to optimize the machining and geometrical parameters for reduced vibration using Taguchi method with grey relational analysis during end milling of Al356/SiC metal matrix composites. The twin channel piezoelectric accelerometer has been used to measure vibration. Acceleration amplitudes at two different positions, one in spindle and another in work piece holder have been recorded for each experiment. Analyses of variance (ANOVA) have been applied to find the prominent parameters and the optimal parameter combination for best average response and signal to noise (S/N) ratio. Grey relational analysis has been implemented to find the optimal permutation of machining and geometrical parameters by considering both responses (acceleration amplitude taken at two different positions) simultaneously. Confirmation tests established that the grey-based Taguchi method has been successful in optimizing the process parameter for reduced vibration.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.27(3) [June 2020]en_US
dc.subjectTaguchi methoden_US
dc.subjectGrey relational analysisen_US
dc.subjectVibrationen_US
dc.subjectAccelerometeren_US
dc.subjectANOVAen_US
dc.subjectCompositesen_US
dc.subjectHSS end millen_US
dc.titleOptimal selection of process parameters to reduce vibration during end milling of Al 356/SiC metal matrix compositeen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.27(3) [June 2020]

Files in This Item:
File Description SizeFormat 
IJEMS 27(3) 590-602.pdf1.12 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.