Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/55241
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShabgard, Mohammad Reza-
dc.contributor.authorGholipoor, Ahad-
dc.contributor.authorJavid, Sajad Lotf-
dc.date.accessioned2020-09-23T09:06:09Z-
dc.date.available2020-09-23T09:06:09Z-
dc.date.issued2020-06-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/55241-
dc.description677-686en_US
dc.description.abstractTurning operation is one of the most used operations at various industries and obtaining desired machined surface quality is one of the important concerns of researchers. In this investigation the effects of using copper oxide nano-fluid as compared with conventional fluid (soluble oil) as coolant and lubricant on surface integrity of machined surface of heat treated cold work tool steel (AISI O1) as workpiece has been investigated. So cutting speed and tool’s feed rate have been considered as input variables and surface roughness, created white layer thickness and density of generated surface cracks have been considered as output parameters and regarding full factorial method of design of experiments a set of experiments for each kind of coolants has been designed and performed. The results have been shown that adding copper oxide nano particles as equal as 1% in volume to deionized water as base fluid decreases the amount of machined surface roughness as compared with using soluble oil. Also using the prepared copper oxide nano-fluid decreases the amount of created white layer thickness and density of generated surface cracks on machined surfaces as compared with soluble oil.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.27(3) [June 2020]en_US
dc.subjectTurning operationen_US
dc.subjectCopper oxide nano-fluiden_US
dc.subjectSurface roughnessen_US
dc.subjectWhite layer thicknessen_US
dc.subjectDensity of surface cracken_US
dc.titleExperimental study on the influence of copper oxide nano-fluid on surface integrity in turning of AISI O1 steelen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.27(3) [June 2020]

Files in This Item:
File Description SizeFormat 
IJEMS 27(3) 677-686.pdf1.01 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.