Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/54873
Title: Additive manufacturing of composite materials by FDM technology: A review
Authors: Mazurchevici, Andrei Danut
Nedelcu, Dumitru
Popa, Ramona
Keywords: Smart forming;3D printing;FDM technology;PLA material properties
Issue Date: Apr-2020
Publisher: NISCAIR-CSIR, India
Abstract: The additive manufacturing known also as “3D printing” or “rapid prototyping” is a present manufacturing method (compared to classic manufacturing methods) where layers of material are deposited at a time (successively) until a finished product is obtained. Depending on the phenomenon, material (in solid, liquid or powder state) used by the 3D printing equipment, a solid part, can be achieved using processes as: binder jetting,extrusion, material jetting, direct energy, vat photo-polymerization and powder bed fusion. In the present paper, we have summarized some knowledge regarding the 3D printing technologies, fused deposition modeling (FDM) prototyping method, and different types of test regarding PLA material properties (tensile test, flexural test). The FDM technology has registered benefits as cost, product quality, functionality and manufacturing time, continuously optimized and adopted by more and more companies, research institutes and consumers.
Page(s): 179-192
URI: http://nopr.niscair.res.in/handle/123456789/54873
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Appears in Collections:IJEMS Vol.27(2) [April 2020]

Files in This Item:
File Description SizeFormat 
IJEMS 27(2) 179-192.pdf1.18 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.