Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/54163
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRaja, R-
dc.contributor.authorJannet, Sabitha-
dc.contributor.authorMohanasundaram, S-
dc.date.accessioned2020-03-16T06:04:56Z-
dc.date.available2020-03-16T06:04:56Z-
dc.date.issued2020-03-
dc.identifier.issn0975-1084 (Online); 0022-4456 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/54163-
dc.description232-234en_US
dc.description.abstractIn this work friction stir welding of AAA 6061 T6 with 7075-T651 of 6mm thickness was carried out. A 31 run Central composite design was adopted to run the experiments. The process parameter ranges were identified based on trial runs. The optimization of the process parameters was done based on the results and plots obtained from Design Expert 10.0 software and the mathematical model was developed for the same. The microhardness tests were also studied. The advancing side was 6061 T6 due to its formability properties. Interference of each process parameters on the Tensile strength was obtained from the contour plots. The fitness was justified by Anova.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceJSIR Vol.79(03) [March 2020]en_US
dc.subjectUltimate Tensile Strengthen_US
dc.subjectAnovaen_US
dc.subjectMathematical Modelen_US
dc.subjectResponse Surface Methodologyen_US
dc.titleMulti Response Optimization of process parameters of friction stir welded AA6061 T6 and AA 7075 T651 Using Response Surface Methodologyen_US
dc.typeArticleen_US
Appears in Collections:JSIR Vol.79(03) [March 2020]

Files in This Item:
File Description SizeFormat 
JSIR 79(3) 232-234.pdf305.98 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.