Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/53511
Title: MQL assisted cleaner machining using PVD TiAlN coated carbide insert: Comparative assessment
Authors: Das, Rabin Kumar
Sahoo, Ashok Kumar
Kumar, Ramanuj
Roy, Sudesna
Mishra, Purna Chandra
Mohanty, Tanmaya
Keywords: MQL;Surface integrity;Machinability;Tool wear;Residual stress;Surface roughness
Issue Date: Oct-2019
Publisher: NISCAIR-CSIR, India
Abstract: Minimum quantity lubrication (MQL) is an alternative over dry machining due to economic and ecological sustainability. In the current research, a comparative investigation has been carried out on machinability and surface integrity aspects of hardened AISI 4340 steel using PVD TiAlN coated carbide inserts during dry and MQL assisted hard turning. Under the dry condition, turned surface has been encountered tensile residual stress whereas compressive residual stress has been generated under MQL condition. Formation of a white layer on the chip has not been experienced under both conditions. Cutting speed predominantly influences tool wear and feed influences more on surface roughness. Dimensional deviation and auxiliary flank wear have been significantly reduced under MQL condition with 16.21% cost savings. An improvement in machinability characteristics and surface integrity under MQL cutting has been noticed compared to dry with favorable interaction and contribute towards cleaner machining process. This may be adopted in machining shop floor as a good replacement over dry machining.
Page(s): 311-325
URI: http://nopr.niscair.res.in/handle/123456789/53511
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Appears in Collections:IJEMS Vol.26(5&6) [October & December 2019]

Files in This Item:
File Description SizeFormat 
IJEMS 26(5&6) 311-325.pdf894.7 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.