Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/52712
Full metadata record
DC FieldValueLanguage
dc.contributor.authorIshtiaque, S M-
dc.contributor.authorMawkhlieng, Unsanhame-
dc.contributor.authorYadav, V K-
dc.date.accessioned2019-12-17T08:17:08Z-
dc.date.available2019-12-17T08:17:08Z-
dc.date.issued2019-12-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/52712-
dc.description424-430en_US
dc.description.abstractA study has been carried out to engineer the fabric comfort by modifying the internal yarn structure through spinning process parameters. The yarn packing density is found to be one of most influential factors of yarn structure, which governs the comfort aspect of the textile material. The work reported here mainly deals with the influence of ring frame process parameters, i.e. spindle speed, twist and draft, on mechanics of yarn structure. It is evident that an increase in spindle speed, twist multiplier and draft decreases the yarn diameter and accordingly increases the packing density. The reduction in yarn diameter is found to be maximum with the increase of draft followed by twist multiplier and spindle speed. The yarn packing density also follows the similar trend. The radial packing density of considered yarns is neither uniform across the yarn cross-section nor maximum near the yarn axis. The maximum packing density is noticed at some distance from the yarn axis and it decreases further towards yarn surface. In general, yarns do not possess maximum packing density near yarn axis. It is observed that considered process parameters significantly influence the packing in core, intermediate and surface zone of the yarns.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.44(4) [December 2019]en_US
dc.subjectFabric comforten_US
dc.subjectPacking densityen_US
dc.subjectRadial packing densityen_US
dc.subjectSpindle speeden_US
dc.subjectTwist multiplieren_US
dc.subjectYarn microtomyen_US
dc.subjectYarn diameteren_US
dc.subjectYarn structureen_US
dc.titleFabric comfort by modifying yarn structure: Part I – Study on structural changes by cross-sectional microtomy of yarnen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.44(4) [December 2019]

Files in This Item:
File Description SizeFormat 
IJFTR 44(4) 424-430.pdf975.9 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.