Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/4985
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGaitonde, V N-
dc.contributor.authorKarnik, S R-
dc.contributor.authorAchyutha, B T-
dc.contributor.authorSiddeswarappa, B-
dc.date.accessioned2009-06-30T03:39:02Z-
dc.date.available2009-06-30T03:39:02Z-
dc.date.issued2006-12-
dc.identifier.issn0975-1084 (Online); 0022-4456 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/4985-
dc.description977-981en_US
dc.description.abstractThis paper presents application of Taguchi optimization method for simultaneous minimization of burr height and burr thickness influenced by cutting conditions and drill geometry. The approach of Taguchi design for multi-objective optimization problem is based on the introduction of a new concept of fitness function for each trial of orthogonal array. The fitness function is derived through mapping the objective functions of the drill optimization problem. In present work, optimal values of cutting speed, feed, point angle and lip clearance angle are determined for a selected drill diam to minimize burr height and burr thickness during drilling of AISI 316L stainless steel workpieces. The effectiveness of proposed method is demonstrated through simulation results and experimental verifications.en_US
dc.language.isoen_USen_US
dc.publisherCSIRen_US
dc.relation.ispartofseriesB23Ben_US
dc.sourceJSIR Vol.65(12) [December 2006]en_US
dc.subjectBurr sizeen_US
dc.subjectDrillingen_US
dc.subjectFitness functionen_US
dc.subjectTaguchi methoden_US
dc.titleTaguchi approach with multiple performance characteristics for burr size minimization in drillingen_US
dc.typeArticleen_US
Appears in Collections:JSIR Vol.65(12) [December 2006]

Files in This Item:
File Description SizeFormat 
JSIR 65(12) 977-981.pdf102.81 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.