Please use this identifier to cite or link to this item:
Title: Preparation and characterization of ceramic oxide granules by spray drying technique
Authors: Poudeh, Leila-Haghighi
Avcioglu, Celal
Duman, Seyma
Özkal, Burak
Keywords: Ceramic oxide powders;Spray drying;Granulation;Particle packing
Issue Date: Feb-2019
Publisher: NISCAIR-CSIR, India
Abstract: This paper investigates the effects of granulation behavior on ZnO, TiO2, Cr2O3, WO3 and MoO3 powders with adding PVA via spray drying technique. In all experiments, spray drying conditions like air inlet temperature, feed flow rate and air flow rate were exactly established 180-200°C, 10-15% and 4-5 bar ranges, respectively. Concentrations of the solutions were adjusted to 30% and 2% solid loadings for each of the ceramic oxides and PVA, respectively. The powder state characterization of the prepared composite granules were performed and studied by being compared with initial powders. SEM examinations demonstrated that the morphologies of ceramic oxides with the addition of PVA were led to spherical structure. However, morphology of WO3-PVA granules displayed hollow spherical structure by contrast with other four ceramic oxide granules. The PVA addition changed particle size and surface area characteristics. The density measurements were also showed an enhancement in the packing properties of these granules.
Page(s): 73-82
ISSN: 0975-1017 (Online); 0971-4588 (Print)
Appears in Collections:IJEMS Vol.26(1) [February 2019]

Files in This Item:
File Description SizeFormat 
IJEMS 26(1) 73-82.pdf2.84 MBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.