Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/45263
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBingol, Mahmut-
dc.contributor.authorCavdar, Kadir-
dc.date.accessioned2018-10-23T10:50:43Z-
dc.date.available2018-10-23T10:50:43Z-
dc.date.issued2018-08-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/45263-
dc.description315-320en_US
dc.description.abstractThere are many different types of glass fibers that can be used in the composites, which are fabricated using a sheet molding compound (SMC) process. The SMC composites produced from different type of glass fibers with unsaturated polyester resin have been investigated based on their microstructure and mechanical properties. The composites produced from woven glass fiber had a better mechanical properties compared with chopped glass fiber reinforced SMC composites. The SEM analysis revealed that resin pull-out formation occurred in the composite reinforced with randomly distributed glass fibers whereas this formation was not detected with woven glass fibers. A good agreement was found between the mechanical analyses and SEM studies for the comparison of random or woven glass fibers reinforcement.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.25(4) [August 2018]en_US
dc.subjectGlass fibersen_US
dc.subjectPolymer-matrix compositesen_US
dc.subjectSMC compositesen_US
dc.subjectWoven fibersen_US
dc.titleNew investigations on higher mechanical properties of woven glass fiber reinforced SMC compositesen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.25(4) [August 2018]

Files in This Item:
File Description SizeFormat 
IJEMS 25(4) 315-320.pdf2.75 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.