Please use this identifier to cite or link to this item:
Title: Inlet Water Temperature Reduction in Ice Production Machine
Authors: Phongsavath, A
Pannucharoenwong, N
Benjapiyaporn, C
Keywords: Heat Exchanger;Freezing;Ice Production;Waste Recovery;Economical Solutions
Issue Date: Oct-2018
Publisher: NISCAIR-CSIR, India
Abstract: This research proposes a performance improvement method of a tube ice production machine using the installation of a heat exchanger. At the end of an ice production process, there are cold rejected water from the defrost process. The cold rejected water are stored at the sump below the cooling tower. A prototype heat exchanger is submerged inside the sump. Incoming water for the next cycle was flown through the heat exchanger and are cooled before entering the cooling tower. The results showed that there are reduction in power consumption and the average production time reduced by 7.58 percent. As the system is more efficient, the machine’s production capacity is increased by 6 percent while being able to reach the payback period of the investment in less than five months.
Page(s): 596-599
ISSN: 0975-1084 (Online); 0022-4456 (Print)
Appears in Collections:JSIR Vol.77(10) [October 2018]

Files in This Item:
File Description SizeFormat 
JSIR 77(10) 596-599.pdf260.21 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.