IJEMS Vol.24(1) [February 2017] : [11] Collection home page


Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 11 of 11
Effect of fibers on the mechanical properties of fly ash and GGBS based geopolymer concrete under different curing conditionsPrabu, B; Kumutha, R; Vijai, KIJEMS Vol.24(1) [February 2017]5-12
A compact dual-band bandpass filter using triple-mode stub-loaded resonators and outer-folding open-loop resonatorsLiu, Ming-Qing; Wang, Cong; Kim, Nam-YoungIJEMS Vol.24(1) [February 2017]13-17
Performance evaluation of cubic boron nitride tool in machining of titanium (grade-II) under minimum quantity lubricationGupta, Munish Kumar; Sood, Pardeep Kumar; Sharma, Vishal SIJEMS Vol.24(1) [February 2017]18-26
Prediction of porous Al/SiC nanocomposite creep behavior via the mechanical alloying processKakhki, Yasaman Saberi; Nategh, Said; Mirdamadi, ShamseddinIJEMS Vol.24(1) [February 2017]27-34
Neutron diffraction versus EBSD analysis of the texture in Fe-36%Ni alloy after accumulative roll bondingAzzeddine, Hiba; Tirsatine, Kamel; Baudin, Thierry; Helbert, Anne-Laure; Mathon, Marie-Hélène; Brisset, François; Bradai, DjamelIJEMS Vol.24(1) [February 2017]35-44
Effects of simultaneous ultrasonic vibration of tool and addition of carbon nanotube into the dielectric in EDM process on machining outputs and surface integrity of Ti-6Al-4V alloyKhosrozadeh, Behnam; Shabgard, MohammadrezaIJEMS Vol.24(1) [February 2017]45-56
Investigation on the homogenization annealing treatment of 5052-based aluminum alloysZhang, Jing; Zhao, Jingjing; Zuo, RulinIJEMS Vol.24(1) [February 2017]57-62
Hardness and tensile behaviour of friction stir welded Cu-40wt%Zn brassSrirangarajalu, N; Rajadurai, AIJEMS Vol.24(1) [February 2017]63-68
Wear and corrosion performance of Fe-based alloy coating on EN24 carbon steelPriyan, M Shunmuga; Azad, A; Kumar, G ManojIJEMS Vol.24(1) [February 2017]69-76
Role of impurities in mechanical alloying amorphization of Cu-Zr and Cu-Zr-Al systemsDastanpoor, E; Enayati, M HIJEMS Vol.24(1) [February 2017]77-82
Elucidating the effect of electrical discharge machining parameters on the surface roughness of AISI D6 tool steel using response surface methodPourasl, Hamed H; Barenji, Reza Vatankhah; Khojastehnezhad, Vahid MIJEMS Vol.24(1) [February 2017]83-90
Collection's Items (Sorted by Submit Date in Descending order): 1 to 11 of 11