IJFTR Vol.42(1) [March 2017] : [17] Collection home page

  Contents

Browse
Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 17 of 17
TitleAuthor(s)SourcePage(s)
Effect of linear density of feed yarn filaments and air-jet texturing process variables on compressional properties of fabricsBaldua, R K; Rengasamy, R S; Kothari, V KIJFTR Vol.42(1) [March 2017]9-16
Finite element analysis of mechanical properties of 2.5D angle-interlock woven composites: Part 1— Full-cell model and its validationSong, Jian; Wen, Weidong; Cui, HaitaoIJFTR Vol.42(1) [March 2017]17-24
Comfort properties and dyeing behaviour of cotton/milkweed blended rotor yarn fabricsKarthik, T; Murugan, R; Sakthivel, J CIJFTR Vol.42(1) [March 2017]25-30
Effects of different production processing stages on mechanical and surface characteristics of polylactic acid and PET fibre fabricsHasani, Hossein; Avinc, Ozan; Khoddami, AkbarIJFTR Vol.42(1) [March 2017]31-37
Manufacturing and morphology of poly(ε-caprolactone) based microfibre webs for biomedical applications through airbrush techniqueBedeloglu, Ayse Celik; Bhullar, Sukhwinder K; Borazan, İsmail; Cin, Zeynep Işlek; Demir, AliIJFTR Vol.42(1) [March 2017]38-42
Modelling of surface roughness based on geometrical parameters of woven fabricsEzazshahabi, Nazanin; Tehran, Mohammad Amani; Latifi, Masoud; Madanipour, KhosroIJFTR Vol.42(1) [March 2017]43-50
Regenerated cellulose/multiwalled carbon nanotube composite films with enhanced mechanical properties prepared in NaOH/urea aqueous solutionLi, Qian; Li, QingIJFTR Vol.42(1) [March 2017]51-56
Comfort limit and heat protection properties of single layer cotton/ nylon-Kermel blended fabricsKakvan, Ali; Najar, Saeed Shaikhzadeh; Psikuta, Agnes; Sharifnejad, FarshidIJFTR Vol.42(1) [March 2017]57-63
Mechanical, thermal and dynamic mechanical analysis of jute fibre reinforced epoxy compositeGupta, M K; Srivastava, R KIJFTR Vol.42(1) [March 2017]64-71
A new technique of producing sliver of Estabragh fibresMerati, Ali Akbar; Moazeni, NajmehIJFTR Vol.42(1) [March 2017]72-76
Numerical simulation of three-dimensional flow field in three-line rollers and four-line rollers compact spinning systems using finite element methodLiu, Xiaoyan; Liu, XinjinIJFTR Vol.42(1) [March 2017]77-82
Finite element modeling of electrospun nanofibre mesh using microstructure architecture analysisGorji, M; Jeddi, Ali A A; Gharehaghaji, A A; Haghpanahi, MIJFTR Vol.42(1) [March 2017]83-88
Effect of alkaline treatment on mechanical properties of voile fabric reinforced epoxy compositesKoyuncu, MenderesIJFTR Vol.42(1) [March 2017]89-93
Effect of moisture and water on thermal protective performance of multilayered fabric assemblies for firefightersChakraborty, Supriyo; Kothari, V KIJFTR Vol.42(1) [March 2017]94-99
Toughened cyanoethyl starch by blending with poly(methyl acrylate-co-acrylic acid-co-acrylonitrile) latex for warp sizingZhu, Zhifeng; Chen, Xiaoyu; Wang, Miao; Lin, JackIJFTR Vol.42(1) [March 2017]100-106
Effect of lateral crushing on tensile property of bamboo, modal and tencel fibresMurugan, R; Karthik, T; Dasardan, B S; Subramanian, V; Shanmugavadivu, KIJFTR Vol.42(1) [March 2017]107-110
Effect of chemical treatments on physico-chemical properties of fibres from banana fruit and bunch stemsYılmaz, Nazire Deniz; Sulak, Mine; Yılmaz, Kenan; Khan, G M ArifuzzamanIJFTR Vol.42(1) [March 2017]111-117
Collection's Items (Sorted by Submit Date in Descending order): 1 to 17 of 17