Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/39811
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAyer, Önder-
dc.contributor.authorBingöl, Sedat-
dc.contributor.authorAltinbalik, Tahir-
dc.contributor.authorKiliçgedik, Hıdır Yankı-
dc.date.accessioned2017-01-23T10:02:01Z-
dc.date.available2017-01-23T10:02:01Z-
dc.date.issued2016-08-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://nopr.niscair.res.in/handle/123456789/39811-
dc.description239-246en_US
dc.description.abstractThe expected life of a gear is important parameter especially for the gears to secure of the mechanics of it. Related to this importance, fatigue failure is one of the most seen failures occurred on gears working under cyclic loads. It is not possible to eliminate fatigue failure effects but it is possible to reduce by appropriate materials selection and design criteria. Due to demand for gears with higher load-carrying capacity and increased fatigue life, it is important to determine the fatigue strengths of the gears. In this study, forward extrusion method with cosine and tapered profile dies is carried out to obtain gear-like products. The products are then tested under cyclic loads to determine the fatigue life. The results obtained from the experiments are used as inputs in developing the ANN models. Different ANN models are developed for cosine curved and straight tapered profiles to obtain the best models. A comparative analysis is performed in order to evaluate the accuracy of the developed models, in terms of statistical measurements (R2, MSE, MAE). Results revealed that proposed ANN models for both cosine curved and tapered profiles are able to predict the fatigue life of the gear-like profiles.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.23(4) [August 2016]en_US
dc.subjectFatigueen_US
dc.subjectGear formingen_US
dc.subjectANNen_US
dc.subjectExtrusionen_US
dc.titleFatigue life modeling of gear like products using ANNen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.23(4) [August 2016]

Files in This Item:
File Description SizeFormat 
IJEMS 23(4) 239-246.pdf360.95 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.