Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPeshwe, V B-
dc.contributor.authorDiwan, S G-
dc.contributor.authorJoseph, A Joseph-
dc.contributor.authorDesa, E-
dc.identifier.issn0975-1033 (Online); 0379-5136 (Print)-
dc.description.abstractA wave and tide gauge has been developed utilising a strain-gauge pressure transducer. The transducer with associated electronic circuitry gives an output voltage proportional to the water column above it. In laboratory experiments, the system has been calibrated and checked to an accuracy of plus or minus 10 cm in a total water column of 40 m. The instrument has been field tested as a tide gauge in shallow waters where there is minimal wave activity and also as a wave recorder. In both cases appropriate filtering is applied to emphasise the measuring parameter. The unit may also be used as a wave recorder in deep waters with appropriate corrections. Possible improvements in the mechanical fabrication and the electronic circuitry are discussed.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJMS Vol.09(2) [June 1980]en_US
dc.titleWave & Tide Gaugeen_US
Appears in Collections:IJMS Vol.09(2) [June 1980]

Files in This Item:
File Description SizeFormat 
IJMS 9(2) 73-76.pdf239.32 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.