Please use this identifier to cite or link to this item:
Title: Jute based all-cellulose composite laminates
Authors: Adak, Bapan
Mukhopadhyay, Samrat
Keywords: Alkali treatment;All-cellulose composite;Ionic liquid;Jute fabric;Regeneration analysis
Issue Date: Dec-2016
Publisher: NISCAIR-CSIR, India
Abstract: In this work, jute fabric reinforced all-cellulose composite laminates have been developed using a conventional hand lay-up method and compression moulding. Five layers of alkali-treated jute fabrics are impregnated with ionic liquid [1-butyl-3-methylimidazolium chloride (BmimCl)]. The impregnated layers are stacked symmetrically maintaining warp and weft directions of fabric, and then heated under pressure in a compression moulding machine for surface-selective dissolution in ionicliquid with the aim to prepare a compact single composite laminate. A matrix phase is formed in-situ by regeneration of dissolved fraction of fibre via solvent exchange. FTIR and X-ray diffraction (XRD) are used to investigate solid-state chemistry and to measure crystallinity of jute in fabric and composite forms. The surface morphology and cross-section of all-cellulose composite laminates is observed by optical microscopy and SEM. It is found that the binding of matrix and reinforcement, final morphology and mechanical properties of prepared ACCs are strongly dependant on pressure, temperature and dissolution time during the preparation of ACCs.
Page(s): 380-384
ISSN: 0975-1025 (Online); 0971-0426 (Print)
Appears in Collections:IJFTR Vol.41(4) [December 2016]

Files in This Item:
File Description SizeFormat 
IJFTR 41(4) 380-384.pdf430.31 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.