Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/360
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMahish, S S-
dc.contributor.authorPunj, S K-
dc.contributor.authorKothari, V K-
dc.date.accessioned2008-03-14T11:06:44Z-
dc.date.available2008-03-14T11:06:44Z-
dc.date.issued2008-03-
dc.identifier.issn0971-0426-
dc.identifier.urihttp://hdl.handle.net/123456789/360-
dc.description13-16en_US
dc.description.abstractThe effect of air pressure, overfeed and varying blend percentage on the properties of the polyester/viscose blended air-jet textured yarns has been studied. It is observed that at lower air pressure and overfeed levels, the increasing texturing speed reduces physical bulk and at higher texturing speed the increasing overfeed increases physical bulk. Physical bulk increases with the simultaneous increase in overfeed and air pressure and it reduces with a combination of low overfeed and high texturing speed. A combination of high texturing speed and low air pressure generates lower instability in the textured yarn.en_US
dc.language.isoen_USen_US
dc.publisherCSIRen_US
dc.relation.ispartofseriesInt. Cl.⁸ D02G3/00en_US
dc.sourceIJFTR Vol.31(1) [March 2008]en_US
dc.subjectAir-jet texturingen_US
dc.subjectBlendingen_US
dc.subjectOverfeeden_US
dc.subjectPhysical bulken_US
dc.subjectPolyester/viscose blenden_US
dc.titleEffect of process parameters and blend percentage on physical properties of polyester/viscose blended air-jet textured yarnsen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.33(1) [March 2008]

Files in This Item:
File Description SizeFormat 
FTR 33(1) (2008) 13-16.pdf352.48 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.