Search


Current filters:
Start a new search
Add filters:

Use filters to refine the search results.


Results 1-10 of 12 (Search time: 0.008 seconds).
Item hits:
TitleAuthor(s)SourcePage(s)
Optimization of surface roughness in turning unidirectional glass fiber reinforced plastics (UD-GFRP) composites using polycrystalline diamond (PCD) cutting toolKumar, Surinder; Meenu; Satsangi, P S; Sardana, H KIJEMS Vol.19(3) [June 2012]163-174
Study on mechanical and tribological behavior of cenosphere filled vinylester composites – A Taguchi methodThakur, Sunil; Chauhan, S RIJEMS Vol.20(6) [December 2013]539-548
Determination of optimum parameters on delamination in drilling of GFRP composites by Taguchi methodKilickap, ErolIJEMS Vol.17(4) [August 2010]265-274
Cross-coupling controller for five degree-of-freedom coplanar nanostageLiu, Van-TsaiIJEMS Vol.20(3) [June 2013]177-182
Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experimentsBabu, G Dilli; Babu, K Sivaji; Gowd, B Uma MaheswarIJEMS Vol.20(5) [October 2013]385-390
Machinability study on AISI410 with different layered inserts in CNC turning during dry conditionsChandrasekaran, K; Marimuthu, P; Raja, K; Manimaran, AIJEMS Vol.20(5) [October 2013]398-404
Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation toleranceDhanabalan, S; Sivakumar, K; Narayanan, C SathiyaIJEMS Vol.20(5) [October 2013]391-397
Optimization of high speed turning parameters of superalloy Inconel 718 material using Taguchi techniqueThakur, Dinesh; Ramamoorthy, B; Vijayaraghavan, LIJEMS Vol.16(1) [February 2009]44-50
Quality improvement to the spinless coating process of touch panel with Taguchi methodsLin, Chern-Sheng; Kao, Te-Neng; Chang, Nin-Chun; Lin, Nan-Jou; Chen, Shiaw-WuIJEMS Vol.22(1) [February 2015]23-28
Determining the influence of process parameters on the induction hardening of AISI 1040 steel by an experimental design methodOnan, M; Baynal, K; Ünal, H İIJEMS Vol.22(5) [October 2015]513-520