Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/33172
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSalhotra, K R-
dc.contributor.authorGupta, R K-
dc.date.accessioned2015-11-06T09:28:25Z-
dc.date.available2015-11-06T09:28:25Z-
dc.date.issued1981-09-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/33172-
dc.description97-100en_US
dc.description.abstractThe spinning performance and yarn quality of an Indian Cotton (J-34) was studied by spinning it to 10S, 16S and 22S yarn over a range of rotor speed (30,000-50,000 rpm) and combing roller speed (4000-9000 rpm). The strength of yarn decreased and yarn unevenness and imperfections increased as the rotor speed was increased. The minimum spinning twist was, however, lower at higher rotor speeds. Too low speed of combing roller (e.g. 4000 rpm) resulted in poor yam quality and higher minimum spinning twist. There was practically no improvement in yarn quality and the minimum spinning twist at combing roller speeds higher than 7000 rpm.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.06(3) [September 1981]en_US
dc.titleEffect of Rotor Speed and Combing Roller Speed on Yarn Characteristics and Minimum Spinning Twisten_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.06(3) [September 1981]

Files in This Item:
File Description SizeFormat 
IJFTR 6(3) 97-100.pdf325.28 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.