|
NISCAIR ONLINE PERIODICALS REPOSITORY (NOPR) >
NISCAIR PUBLICATIONS >
Research Journals >
Indian Journal of Engineering and Materials Sciences (IJEMS) >
IJEMS Vol.16 [2009] >
IJEMS Vol.16(1) [February 2009] >
| Title: | Optimization of high speed turning parameters of superalloy Inconel 718 material using Taguchi technique |
| Authors: | Thakur, Dinesh
Ramamoorthy, B
Vijayaraghavan, L |
| Keywords: | Cutting force
Feed force
Chip analysis
Taguchi method |
| Issue Date: | Feb-2009 |
| Publisher: | CSIR |
| Abstract: | Superalloy, Inconel 718 is widely used in sophisticated applications due to its unique properties desired for the engineering applications. Due to its peculiar characteristics machining of Superalloy Inconel 718 is difficult and costly. The present work is an attempt to make use of Taguchi optimization technique to optimize cutting parameters during high speed turning of Inconel 718 using tungsten carbide cutting tool. Taguchi method is a powerful design of experiments (DOE) tool for engineering optimization of a process. It is an important tool to identify the critical parameters and predict optimal settings for each process parameter. Analysis of variance (ANOVA) is used to study the effect of process parameters and establish correlation among the cutting speed, feed and depth of cut with respect to the major machinability factor, cutting forces such as cutting force and feed force. Validations of the modeled equations are proved to be well within the agreement with the experimental data. |
| Page(s): | 44-50 |
| ISSN: | 0971-4588 |
| Source: | IJEMS Vol.16(1) [February 2009]
|
|
