Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorSharma, I C-
dc.contributor.authorGupta, Narender-
dc.contributor.authorGupta, Dinesh-
dc.contributor.authorVaid, Kallash-
dc.contributor.authorGoyal, Surender Kumar-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.description.abstractThe effect of blend percentage, yarn count and different processing parameters, viz. spindle speed, break draft, spinning draft and apron spacer size, on the incidence of slubs in polyester-viscose blend yarn and at fabric stage (in weft direction) was studied. With increase in the polyester content in the polyester-viscose blend the number of slubs decreased; increase in spindle speed, break draft and finer count resulted in increase in the number of slubs. Minimum number of slubs occurred at a particular spinning draft and apron spacer size; and if these were increased or decreased, the frequency of slubs increased. However, there was no significant difference in the number of slubs in the fabric state.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.10(1) [March 1985]en_US
dc.titleEffect of Processing Parameters on Incidence of Slubs in Polyester-Viscose Yarn and Fabricen_US
Appears in Collections:IJFTR Vol.10(1) [March 1985]

Files in This Item:
File Description SizeFormat 
IJFTR 10(1) 32-34.pdf530.32 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.