Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPalaniswamy, N K-
dc.contributor.authorMohamed, A Shabeer-
dc.contributor.authorRobert, P William-
dc.description.abstractPly twist required to produce balanced two-ply cotton rotor yarn has been measured by placing the two-ply yarn freely in water. When the two-ply yarns are placed freely in water, the ply twist remaining in the yarn is about 40-45 % of single yarn twist, irrespective of ply-to-single yarn twist ratio used for the production of yarn. The twist liveliness of two-ply yarns both in dry and wet states increases as the ply-to-single yarn twist ratio increases. The ply yarn with 45% of single yarn twist shows the lowest amount of snarling twist both in dry and wet states. The fabrics produced using the two-ply yarn with 45% of single yarn twist show negligible amount of spirality in both dry and wet relaxed conditions.en_US
dc.relation.ispartofseriesInt. Cl.⁸ D02G3/00en_US
dc.sourceIJFTR Vol.32(2) [June 2007]en_US
dc.subjectCotton rotor yarnen_US
dc.subjectPly twisten_US
dc.subjectTightness factoren_US
dc.subjectTwist livelinessen_US
dc.titleBalanced two-ply cotton rotor yarnen_US
Appears in Collections:IJFTR Vol.32(2) [June 2007]

Files in This Item:
File Description SizeFormat 
FTR 32(2) (2007) 169-172.pdf59.79 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.