Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTyagi, G K-
dc.contributor.authorChoudhary, A K-
dc.contributor.authorSalhotra, K R-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.description.abstractAcrylic-cotton rotor-spun yarns are substantially weaker, more even and extensible, and have lower abrasion resistance than the equivalent ring-spun yarns. The difference in tenacity of ring- and rotor-spun yarns is much less for coarse yarns. An increase in twist factor significantly increases the abrasion resistance of rotor yarns. However, with 70: 30 acrylic- cotton ring yarns, the abrasion resistance does not show any change with increasing twist factor. Acrylic content in the fibre mix should be more than 50% for improvement in yarn characteristics.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.21(2) [June 1996]en_US
dc.subjectAcrylic-cotton yarnen_US
dc.subjectRing-spun yarnen_US
dc.subjectRotor-spun yarnen_US
dc.subjectTwist lossen_US
dc.subjectTex twist factoren_US
dc.titleCharacteristics of acrylic-cotton yarns produced on ring and rotor spinning systemsen_US
Appears in Collections:IJFTR Vol.21(2) [June 1996]

Files in This Item:
File Description SizeFormat 
IJFTR 21(2) 116-121.pdf426.08 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.