IJEMS Vol.22(3) [June 2015] : [15] Collection home page


Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 15 of 15
Fly ash cenospheres as reinforcement in different polymer composites – a comparative study of physical and mechanical propertiesSampathkumaran, P; Kishore; Seetharamu, S; Pattanashetti, V V; Kumar, M Shekhar; Niranjan, H BIJEMS Vol.22(3) [June 2015]354-362
Structural performance of a full-scale reinforced concrete frame strengthened by a steel grid shear wallKim, Heecheul; Park, Jung Woo; Park, Jin Young; Lee, Young Hak; Kim, Dae-JinIJEMS Vol.22(3) [June 2015]345-353
Usage of steel slag in concrete as fine and/or coarse aggregateSezer, Gözde İnan; Gülderen, MertIJEMS Vol.22(3) [June 2015]339-344
Monotonic and low cycle fatigue behaviour of concrete beams strengthened with textile reinforced concrete U-wrapGopinath, Smitha; Murthy, A Rama Chandra; Iyer, Nagesh RIJEMS Vol.22(3) [June 2015]331-338
Assessment of surface roughness and MRR while machining brass with HSS tool and carbide insertsVikram, K Arun; Ratnam, Ch; Narayana, K Sankara; Ben, B SatishIJEMS Vol.22(3) [June 2015]321-330
Process parameters optimization on machining force and delamination factor in milling of GFRP composites using grey relational analysisJenarthanan, M P; Naresh, NIJEMS Vol.22(3) [June 2015]313-320
Fabrication and characterization of amorphous-nanocrystalline Al80Fe10Ti5M3B2 (M=Cr, Ni and Nb) alloysRavanbakhsh, A; Tavoosi, M; Karimzadeh, FIJEMS Vol.22(3) [June 2015]307-312
Fine finishing of SiC microchannels using abrasive flow machiningVenkatesh, G; Sharma, Apurbba Kumar; Kumar, PradeepIJEMS Vol.22(3) [June 2015]297-306
Experimental optimization of wear parameters of sintered bronze based materialsGüngör, Kadir; Ozsert, Ibrahim; Demirer, Ahmet; Fiçici, Ferit; Demir, AdemIJEMS Vol.22(3) [June 2015]288-296
Slow cooling of hot rolled bars to eliminate hydrogen induced cracks in Cr-Mo steelsRavichandar, D; Nagashanmugam, K B; Balusamy, TIJEMS Vol.22(3) [June 2015]283-287
An improved deadbeat predictive current control for permanent magnet linear synchronous motorWang, Mingyi; Li, Liyi; Pan, Donghua; Guo, QingboIJEMS Vol.22(3) [June 2015]273-282
CNFET-based design of resilient MCML XOR/XNOR circuit at 16-NM technology nodeSrivastava, Pragya; Islam, AminulIJEMS Vol.22(3) [June 2015]261-267
Temperature effect on microstructure and mechanical properties of aluminum film deposited on glass substratesHer, Shiuh-Chuan; Wang, Yi-HsiangIJEMS Vol.22(3) [June 2015]268-272
Development of rapid large batteries charging system with on-line LCD monitoringLin, Hsiung Cheng; Pan, Chia Yu; Zhan, Zhao YuanIJEMS Vol.22(3) [June 2015]256-260
State inspection scheme using scatter ratio Fisher techniqueWang, Mei; Zan, Hong Yang; Yang, Yong; Wang, Cheng AngIJEMS Vol.22(3) [June 2015]249-255
Collection's Items (Sorted by Submit Date in Descending order): 1 to 15 of 15