Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGupta, K K-
dc.contributor.authorKothari, V K-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.description.abstractAn instrument has been fabricated to study the shrinkage behaviour of yarns. The effect of various process parameters, namely speed, overfeed and air pressure, on the shrinkage behaviour of air-jet textured polyester yarns has been investigated. Samples were prepared using factorial design for three variables and then tested for shrinkage, bulk and instability. Three response surface equations were calculated for shrinkage, bulk and instability in terms of process parameters. The results show that the shrinkage value decreases with the increase in overfeed, air pressure and speed. The use of water during the air-jet texturing process is found to increase the shrinkage in the resultant air-jet textured yarns.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.relation.ispartofseriesInt. CI.7 D02J1/00, D06C27/00en_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.30(3) [September 2005]en_US
dc.subjectAir-jet texturingen_US
dc.subjectPartially oriented yarnen_US
dc.titleDevelopment of an instrument to study shrinkage properties of air-jet textured yarnsen_US
Appears in Collections:IJFTR Vol.30(3) [September 2005]

Files in This Item:
File Description SizeFormat 
IJFTR 30(3) 278-282.pdf1.07 MBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.