Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/24530
Title: Effect of mass of kapas on quality of ginned lint
Authors: Selvan, M Tamil
Raghunathan, K
Keywords: Cotton;Ginning;Lint
Issue Date: Sep-2006
Publisher: NISCAIR-CSIR, India
IPC Code: Int.Cl.8 D01B1/00
Abstract: Impact of mass of kapas on quality of ginned lint has been studied using MCU-5 variety. It is found that with the increase in mass of kapas, the quantity of lint and its length increase. The other physical properties of lint are also found to be superior with the increase in mass of kapas. Irrespective of the mass of kapas, the ginning machine setting shows significant impact on fibre properties. The strength and elongation of fibre vary significantly with varying length of oscillation of beater knife from the edge of fixed knife. This is because the removal of fibres from the seed is accomplished by a fixed knife held tightly against a single ginning roller and a moving (reciprocating) knife that co-operates with the roller and fixed knife to separate the fibre from the seeds. The range of increase in short fibre content and nep (content/g) is found to be significantly higher in the sample below 100 mg. If feeding is done in the form of locule in the ginning machine, the fibre deterioration is significantly lesser as compared to feeding as kapas.
Page(s): 369-375
URI: http://hdl.handle.net/123456789/24530
ISSN: 0975-1025 (Online); 0971-0426 (Print)
Appears in Collections:IJFTR Vol.31(3) [September 2006]

Files in This Item:
File Description SizeFormat 
IJFTR 31(3) 369-375.pdf1.46 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.