Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTyagi, G K-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.description.abstractThe influence of ply twist and plying technique on the properties of OE rotor yarns spun from acrylic and viscose fibres has been studied. It is observed that the tenacity, abrasion resistance, unevenness and hairiness of OE rotor-spun yarns substantially improve after plying. The two-for-one plied yarns produced using the same processing conditions are weaker by 3-13%, more extensible by 6-22%, more even by 2-7%, less twist lively by 12-22%, more hairy by 9-26% and have 2-5% lower abrasion resistance than the ring plied yarns in both twisting techniques. Increasing the ply twist factor increases the tenacity, abrasion resistance and twist liveliness but decreases the hairiness of plied yarns. The properties of the fibrous material and draw-off nozzle also affect the quality of OE rotor-spun plied yarns.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.relation.ispartofseriesInt. Cl.8 D02G3/00en_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.31(2) [June 2006]en_US
dc.subjectAcrylic yarnen_US
dc.subjectPly twist factoren_US
dc.subjectRing plied yarnen_US
dc.subjectRotor-spun yarn Twist livelinessen_US
dc.subjectWrapper fibreen_US
dc.titleQuality aspects of two-for-one and ring-twisted OE rotor-spun plied yarnsen_US
Appears in Collections:IJFTR Vol.31(2) [June 2006]

Files in This Item:
File Description SizeFormat 
IJFTR 31(2) 293-297.pdf3.26 MBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.