Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPrasad, Dinesh-
dc.contributor.authorBhaskar, Data Ram-
dc.contributor.authorSrivastava, Mayank-
dc.identifier.issn0975-1041 (Online); 0019-5596 (Print)-
dc.description.abstractA new voltage mode multi input single output (MISO) type biquad is proposed. The proposed configuration employs one voltage differencing transconductance amplifier (VDTA) as the active element, two capacitors and a grounded resistor. The configuration realizes all five filter functions [i.e. Low Pass (LP), High Pass (HP), Band Pass (BP), Notch (BR) and All Pass (AP)] without any matching condition. The natural frequency (ω0) and bandwidth (BW) are independently tunable. The workability of proposed configuration has been verified using SPICE simulation with TSMC CMOS 0.18μm process parameters.en_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJPAP Vol.51(12) [December 2013]en_US
dc.subjectVoltage mode filteren_US
dc.subjectVoltage differencing transconductance amplifieren_US
dc.subjectAnalog signal processingen_US
dc.titleUniversal voltage-mode biquad filter using voltage differencing transconductance amplifieren_US
Appears in Collections:IJPAP Vol.51(12) [December 2013]

Files in This Item:
File Description SizeFormat 
IJPAP 51(12) 864-868.pdf88.44 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.