IJEMS Vol.20(5) [October 2013] : [13] Collection home page


Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 13 of 13
Flow resistance network analysis of the back-pressure of automotive mufflersMunjal, M L; Vijayasree, N K; Chaitanya, PIJEMS Vol.20(5) [October 2013]339-349
Hydrothermal ageing effects on flexural properties of GFRP composite laminatesRao, P Sampath; Hussain, M ManzoorIJEMS Vol.20(5) [October 2013]415-424
Solidification of heavy metal sludge using cement, fly ash and silica fumeChindaprasirt, Prinya; Sinsiri, Theerawat; Napia, Chuwit; Jaturapitakkul, ChaiIJEMS Vol.20(5) [October 2013]405-414
DC conductivity studies of doped polyaniline tungsten oxide nanocompositesSastry, D Nagesa; Revanasiddappa, M; Basavaraja, C; Suresh, T; Raghavendra, S CIJEMS Vol.20(5) [October 2013]435-442
Machinability study on AISI410 with different layered inserts in CNC turning during dry conditionsChandrasekaran, K; Marimuthu, P; Raja, K; Manimaran, AIJEMS Vol.20(5) [October 2013]398-404
Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experimentsBabu, G Dilli; Babu, K Sivaji; Gowd, B Uma MaheswarIJEMS Vol.20(5) [October 2013]385-390
Evaluation of the dynamic modulus of asphalt mixture incorporating reclaimed asphalt pavementShahadan, Zulkurnain; Hamzah, Meor Othman; Yahya, Ahmad Shukri; Jamshidi, AliIJEMS Vol.20(5) [October 2013]376-384
An investigation on lateral buckling of laminated composites with delaminationBalcioğlu, H Ersen; Aktaş, MehmetIJEMS Vol.20(5) [October 2013]367-375
Effect of heat transfer enhancement and NOx emission using Al2O3/water nanofluid as coolant in CI engine Raja, M; Vijayan, R; Suresh, S; Vivekananthan, RIJEMS Vol.20(5) [October 2013]443-449
Influence of base inclination on vortex formation during draining from cylindrical tanksGowda, B H L; Akhuli, S; Anudeep, B R; Ipe, K R; Kishore, KIJEMS Vol.20(5) [October 2013]361-366
Sensitivity analysis of submerged arc welding parameters for low alloy steel weldmentDhas, J Edwin Raja; Satheesh, MIJEMS Vol.20(5) [October 2013]425-434
Optimization of machining parameters of EDM while machining Inconel 718 for form tolerance and orientation toleranceDhanabalan, S; Sivakumar, K; Narayanan, C SathiyaIJEMS Vol.20(5) [October 2013]391-397
Design and optimization of a throttle body assembly by CFD analysisKumar, J Suresh; Ganesan, V; Mallikarjuna, J M; Govindarajan, SIJEMS Vol.20(5) [October 2013]350-360
Collection's Items (Sorted by Submit Date in Descending order): 1 to 13 of 13