Please use this identifier to cite or link to this item:
|Title:||Corrosion susceptibilities of Al-Cu/TiC MMCs fabricated by conventional hot pressing|
|Series/Report no.:||C22F, C22C 47/00|
|Abstract:||The effect of TiC particle volume fraction on the electrochemical behaviours of metal matrix composites (MMCs), which is Al-Cu based reinforced with TiCp has been investigated in both aerated and deaerated 1.0 N H₂₄SO₄ aqueous solutions. Composites reinforced with TiC particles at volume fractions of 20, 30 and 40% have been produced by conventional hot pressing method and then, artificially aged (T6). The corrosion susceptibilities of the composites have been analyzed by using the cyclic potentiodynamic polarization technique. The surface morphology of the composites has been determined by scanning electron microscopy (SEM). The results show that the corrosion susceptibilities of the composites increase with increased TiC particle content but decreases with T6 heat treatment performed on the composites.|
|Appears in Collections:||IJEMS Vol.14(4) [August 2007]|
Files in This Item:
|IJEMS 14(4) (2007) 303-308.pdf||1.06 MB||Adobe PDF||View/Open|
Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.