Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/19204
Title: A comparative study of nylon 6 tyre yarns produced by conventional two-stage and spin-draw processes
Authors: Sengupta, A K
Shanmugavasan, A
Ravishankar, G
Keywords: Fatigue behaviour;Nylon 6;Spin-draw process;Tyre yarn
Issue Date: Mar-1991
Publisher: NISCAIR-CSIR, India
Abstract: Nylon 6 tyre yarns of 1260 denier were obtained using conventional (spinning, draw twisting) and spin-draw routes. The polymers, spinning temperature and draw ratios were the same for both the processes. It is observed that while the yarn tenacities obtained with the two processes are similar, the yarn produced by the spin-drawn process gives a higher value for toughness. The resistance to cyclic fatigue is also higher for the spin-drawn yam. The birefringence, sonic modulus and density are higher for the yarns produced by the spin-draw process, signifying a higher densification of the structure in these yarns. Studies made on a thermo-mechanical analyzer reveal that while the maximum shrinkage values are similar, the yam obtained through the spin-draw process shows a higher shrinkage onset temperature as well as lower shrinkage at temperatures ranging between 120oC and 160oC. The results indicate that the tyre yam made by the spin-draw process is superior to the yarn made by the conventional process.
Page(s): 25-28
URI: http://hdl.handle.net/123456789/19204
ISSN: 0975-1025 (Online); 0971-0426 (Print)
Appears in Collections:Special issue: IJFTR Vol.16(1) [March 1991]

Files in This Item:
File Description SizeFormat 
IJFTR 16(1) 25-28.pdf962.5 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.