Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/14263
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRay, Sadhan Chandra-
dc.contributor.authorBanerjee, P K-
dc.date.accessioned2012-06-08T07:40:02Z-
dc.date.available2012-06-08T07:40:02Z-
dc.date.issued2012-06-
dc.identifier.issn0975-1025 (Online); 0971-0426 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/14263-
dc.description138-145en_US
dc.description.abstractIn the present study, the theoretical analysis of the output of the models of the 1×1 rib loop formation process has been performed to get the insight into the mechanics of loop formation system. For the purpose, the important output variables of the models have been generated for 128 sets of combinations of input variable. The range of the values of input variables have been chosen keeping in view the machine and yarn parameters available for the earlier experimental work as well as relevant information available in published literature. The analyses of the output of the models reveal that the main output variables of the loop formation system, namely loop length and yarn tension (needle force), are influenced by different machine, yarn and process variables as well as timing of knitting. In some cases the response of the system, i.e. the change in output variables due to incremental changes in input variables is large, whereas in some other cases the response is moderate to marginal. In fact, the rate of change in output variables depends on the combination of the input variables as well as the range of values of input variables.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJFTR Vol.37(2) [June 2012]en_US
dc.subject1×1 rib loopen_US
dc.subjectCam forceen_US
dc.subjectCylinder loopen_US
dc.subjectDelayed timingen_US
dc.subjectDial loopen_US
dc.subjectLoop lengthen_US
dc.subjectPeak forceen_US
dc.subjectRobbingen_US
dc.titleMechanics of 1×1 rib loop formation process on a dial and cylinder machine – Analysis of modelled systemen_US
dc.typeArticleen_US
Appears in Collections:IJFTR Vol.37(2) [June 2012]

Files in This Item:
File Description SizeFormat 
IJFTR 37(2) 138-145.pdf72.34 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.