Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/12894
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEsendemir, Ümran-
dc.contributor.authorÖndürücü, Ayşe-
dc.date.accessioned2011-10-18T10:34:01Z-
dc.date.available2011-10-18T10:34:01Z-
dc.date.issued2011-08-
dc.identifier.issn0975-1017 (Online); 0971-4588 (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/12894-
dc.description283-292en_US
dc.description.abstractIn this study, bearing strengths of bolted joints with different clearances are compared. Woven-glass-epoxy prepreg composites are tested under two different bolt-bearing conditions. The geometry of the samples for bolted joints is suitably varied in order to find the limit for width-to-diameter (W/d) and edge distance-to-diameter ratios (E/d), which are necessary to avoid unsafe failure modes. Damage progression is examined using scanning electron microscope (SEM) on specimens with mixed (bearing+net tension) mode for different percentages of their ultimate failure load. It is observed that the clearance between the bolt and hole has an important influence on the failure load of mechanically fastened joints.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJEMS Vol.18(4) [August 2011]en_US
dc.subjectBolted-jointsen_US
dc.subjectFailure analysisen_US
dc.subjectScanning electron microscopy (SEM)en_US
dc.titleComparison of bolted joints with two different clearance typesen_US
dc.typeArticleen_US
Appears in Collections:IJEMS Vol.18(4) [August 2011]

Files in This Item:
File Description SizeFormat 
IJEMS 18(4) 283-292.pdf1.05 MBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.