Please use this identifier to cite or link to this item: http://nopr.niscair.res.in/handle/123456789/12002
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTebbji, K-
dc.contributor.authorAouniti, A-
dc.contributor.authorAttayibat, A-
dc.contributor.authorHammouti, B-
dc.contributor.authorOudda, H-
dc.contributor.authorBenkaddour, M-
dc.contributor.authorRadi, S-
dc.contributor.authorNahle, A-
dc.date.accessioned2011-06-16T13:12:19Z-
dc.date.available2011-06-16T13:12:19Z-
dc.date.issued2011-05-
dc.identifier.issn0975-0991 (Online); 0971-457X (Print)-
dc.identifier.urihttp://hdl.handle.net/123456789/12002-
dc.description244-253en_US
dc.description.abstractThe inhibitor effect of two isomers namely 2-(1',5,5'-trimethyl-1H,1'H-3,3'-bipyrazol-1-yl)ethanol (1-TBE) and 2-(1',5,5'-trimethyl-1H,2'H-3,3'-bipyrazol-2-yl)ethanol (2-TBE) on the corrosion of mild steel in 1.0 M hydrochloric acid has been investigated at 308 K using weight loss measurements and electrochemical techniques (impedance spectroscopy and polarisation curves). Inhibition efficiency is dependent upon the pyrazole structure, with 1-TBE serving as a better inhibitor than 2-TBE and its inhibition efficiency increases with the increase of concentration of inhibitor to attain 93% in the presence of 10-3M. Polarisation curves indicate that 1-TBE and 2-TBE act essentially as cathodic inhibitors. Efficiency (E) percent values obtained by various methods are reasonably good in agreement. EIS measurements show an increase of the transfer resistance with the inhibitor concentration. The temperature effect on the corrosion behaviour of steel in 1.0 M HCl without and with the inhibitor at 10-3M is studied in the temperature range 308-333 K, Some thermodynamic parameters such as adsorption heat (H°), adsorption entropy (S°) and adsorption free energy (G°) have been calculated by employing thermodynamic equations. Kinetic parameters such as apparent activation energy and pre-exponential factor have also been calculated. Adsorption of 1-TBE on the mild steel surface in 1.0 M HCl follows the Langmuir isotherm model.en_US
dc.language.isoen_USen_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceIJCT Vol.18(3) [May 2011]en_US
dc.subjectPyrazoleen_US
dc.subjectSteelen_US
dc.subjectHydrochloric aciden_US
dc.subjectCorrosion inhibitionen_US
dc.subjectAdsorptionen_US
dc.titleInhibition efficiency of two bipyrazole derivatives on steel corrosion in hydrochloric acid mediaen_US
dc.typeArticleen_US
Appears in Collections:IJCT Vol.18(3) [May 2011]

Files in This Item:
File Description SizeFormat 
IJCT 18(3) 244-253.pdf231.39 kBAdobe PDFView/Open


Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.