NISCAIR Online Periodicals Repository

Research Journals >
Journal of Scientific and Industrial Research (JSIR) >
JSIR Vol.70 [2011] >
JSIR Vol.70(04) [April 2011] >

Title: Determination of optimal cutting conditions in finish turning of austempered ductile iron using Taguchi design method
Authors: Kacal, A
Gulesin, M
Keywords: Austempered ductile iron
Finish turning
Taguchi design method
Issue Date: Apr-2011
Publisher: NISCAIR-CSIR, India
Abstract: This study presents optimization of process parameters using Taguchi design method in finish turning of austempered ductile iron. An orthogonal array of L18 was used; ANOVA was performed to identify significant factors affecting surface roughness (Ra) and primary cutting force (Fc). Optimum processes parameter combination was acquired by using analysis of signal-to-noise (S/N) ratio. For Ra and Fc values, prediction error was found to be within the confidence limit at 95% confidence level.
Page(s): 278-283
CC License:  CC Attribution-Noncommercial-No Derivative Works 2.5 India
ISSN: 0975-1084 (Online); 0022-4456 (Print)
Source:JSIR Vol.70(04) [April 2011]

Files in This Item:

File Description SizeFormat
JSIR 70(4) 278-283.pdf162.58 kBAdobe PDFView/Open
 Current Page Visits: 74 
Recommend this item


Online Submission of Articles |  NISCAIR Website |  National Knowledge Resources Consortium |  Contact us |  Feedback

Disclaimer: NISCAIR assumes no responsibility for the statements and opinions advanced by contributors. The editorial staff in its work of examining papers received for publication is helped, in an honorary capacity, by many distinguished engineers and scientists.

CC License Except where otherwise noted, the Articles on this site are licensed under Creative Commons License: CC Attribution-Noncommercial-No Derivative Works 2.5 India

Copyright © 2015 The Council of Scientific and Industrial Research, New Delhi. All rights reserved.

Powered by DSpace Copyright © 2002-2007 MIT and Hewlett-Packard | Compliant to OAI-PMH V 2.0

Home Page Total Visits: 164904 since 01-Sep-2015  Last updated on 27-Jun-2016Webmaster: