Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBahaaideen, Farhad B-
dc.contributor.authorRipin, Zaidi Mohd-
dc.contributor.authorAhmad, Zainal Arifin-
dc.identifier.issn0975-1084 (Online); 0022-4456 (Print)-
dc.description.abstractThis study presents electroless Ni-P-Cg (graphite)-SiC composite coating deposition onto piston rings of a small two stroke utility engine at 90°C under Cg (10 g/l) and SiC (8 g/l) concentration at agitation speeds of 160 rpm. Coating showed compact embedding of Cg and SiC particles in Ni matrix, uniformly and largely distributed in coating by mechanical stirring. Heat-treatment of coating increased microhardness due to crystallization of a hard Ni3P phase after heat treatment. An average surface roughness of a standard piston ring has improved from 1.095 µm to 0.900 µm, with a lower friction coefficient of coateden_US
dc.publisherNISCAIR-CSIR, Indiaen_US
dc.rights CC Attribution-Noncommercial-No Derivative Works 2.5 Indiaen_US
dc.sourceJSIR Vol.69(11) [November 2010]en_US
dc.subjectComposite coatingen_US
dc.subjectElectroless platingen_US
dc.subjectNi-P-Cg (graphite)-SiC coatingen_US
dc.titleElectroless Ni-P-Cg(graphite)-SiC composite coating and its application onto piston rings of a small two stroke utility engineen_US
Appears in Collections:JSIR Vol.69(11) [November 2010]

Files in This Item:
File Description SizeFormat 
JSIR 69(11) 830-834.pdf303.27 kBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.