Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMondal, D P-
dc.contributor.authorVinod, E M-
dc.contributor.authorDas, S-
dc.contributor.authorRao, T S V C-
dc.description.abstractAA2014 Al alloy specimens (in the form of plates) have been shot peened to varying intensity levels (0.14 to 0.48 mm ALMEN ā€˜Nā€™) and the effect of shot peening intensity on the subsurface plastic deformation, surface and subsurface residual stress field, depth of peening and microstructure evolution has been investigated. The influence of shot peening intensity on the high stress abrasive wear behaviour has also been investigated. The wear rate reduced significantly due to mild shot peening. Intensive shot peening did not lead to any significant improvement in wear resistance, rather beyond a critical peening intensity, the wear resistance of material starts deteriorating.en_US
dc.sourceIJEMS Vol.15(1) [February 2008]en_US
dc.subjectShot peeningen_US
dc.subject2014-Al alloyen_US
dc.subjectAbrasive wearen_US
dc.subjectResidual stressen_US
dc.subjectMicrohardness distributionen_US
dc.subjectShot peening intensity.en_US
dc.titleHigh stress abrasive wear behaviour of shot peened AA2014 Al-alloyen_US
Appears in Collections:IJEMS Vol.15(1) [February 2008]

Files in This Item:
File Description SizeFormat 
IJEMS 15(1) (2008) 41-50.pdf1.17 MBAdobe PDFView/Open

Items in NOPR are protected by copyright, with all rights reserved, unless otherwise indicated.